Handle - Ring

(Note: Measurements are outside max. dimensions unless stated otherwise).

18th Century : Ring Handle. Classic period design.

RING:
Diam. Aprox. 17mm. (5/8")
Thickness 2mm. 1/16"

POMMEL:
Collar diam. 10mm. (3/8")
Protrudes from drawer front 7.5mm. (5/16") 
Length threaded shaft : Aprox. 22mm. (7/8")

Machine screw option supplied with correct period brass round slotted nut.

Note: Collar has a thin slightly worn edge and may not be a precise circle (as per original).

It is recommended that if selecting screw thread option, a pilot hole is drilled and pre-cut with a steel screw of slightly smaller size before screwing in the casting to avoid shearing.