Handle - Swan Neck Loop

(Note: Measurements are outside max. dimensions unless stated otherwise).

18th Century : Rococo swan neck handle with pierced backplates.

Option : This casting is supplied at a budget price with a basic machine tumble polished finish which is rather dull caused by minute pitting from bead blasting. We can buff polish by hand to a smooth finish as an option if selected by clicking on the OPTION box above, or supply machine polished if left unticked.

Pommel to pommel centres 95mm. (3 3/4")

HANDLE
Width (side to side of loop) 77mm. (3 1/16") 
Inside width between peg ends 83mm. (3 1/4")
Height 42mm. (1 5/8")
Thickness 8mm. (5/16")
End pegs diam. 4.5mm. (3/16")
End peg depth 8mm. (5/16")

BACKPLATES
63mm. (2 1/2") x 31mm (1 3/16")
Centre pommel hole 5mm. x 5mm. (3/16" x 3/16")
Thickness (variable) 4mm. 3/16")

POMMELS
Height 45mm. (1 3/4")
Head 11mm (3/8") + square shaft 15mm. (9/16") + threaded rod 19mm. (3/4") .
Collar diam. 8mm. (5/16")
Internal pommel hole diam. 4.5mm. 3/16")
Square shaft 4mm. (3/16") x 4mm. (3/16")

Supplied with correct period round nuts. Loop handle is plain on reverse, without decoration.